Bar Phantom
Bar Phantoms offer precise determination of camera intrinsic resolution, collimator spatial resolution, field size and linearity.
We offer a range of standard and jumbo sizes manufactured to the highest quality standards.
|
|
Flood Phantom
Flood phantoms provide a means of lighting a scintillation camera's crystal to determine response uniformity over the entire field.
|
|
Thyroid Phantom
The Thyroid Phantom permits the precise duplication of clinical conditions by simulating thyroid scans in the 30 to 40 gram range.
|
|
Hoffman 3D Brain Phantom
The Hoffman 3-D Brain Phantom provides the anatomically accurate three dimensional simulation of the radioisotope distribution found in the normal brain.
|
|
Jaszczak SPECT Phantom
The Jaszczak SPECT Phantom provides consistent performance information for any SPECT or PET system. Multiple performance characteristics of camerabased SPECT systems are evaluated from a single scan of the phantom.
|
|
Jaszczak ACR SPECT Phantom
The ACR SPECT Phantom meets the requirements set by ACR. The Phantom provides consistent performance information for any SPECT or PET system.
The Phantom is the same as the Deluxe SPECT Phantom except that the flanges have been removed. Multiple performance characteristics of camera-based SPECT systems are evaluated from a single scan of the phantom.
|
|
Hot Spot Insert
• For use with high spatial resolution SPECT and PET systems.
• System resolution test for high contrast structures There are two versions of the insert - one that fits the deluxe and standard SPECT phantoms and one that fits the ACR SPECT phantom.
|
|
Triple Line Insert
The Triple Line Insert is used to produce three 1 mm diameter parallel lines of tracer material spaced 7.5 cm apart. The locations of the fillable tubes are based on the recommendations in the NEMA Standards Publication for Performance Measurements of Scintillation Cameras, 1986.
|
|
Hollow And Micro Hollow Spheres
Designed for use in all circular and elliptical SPECT cylinders. Simulates hot and colds spherical lesions. Quantitative evaluation of spatial resolution/object.
Evaluation of quantitative ECT reconstruction methods.
|
|
Extended Oval PET Phantom - Turkington
The Extended Oval PET Phantom is designed to simulate the distribution of radioactivity throughout the long body torso.
It consists of a set of two 40 cm long cylinder sections with an oval shaped cross section. A single 40 cm section fills the axial FOV of a large camera.
The Phantom allows placement of optional internal containers to simulate
radioactive distribution in various optional organ inserts.
|
|
Cardiac Insert For Turkington PET Phantom
This insert provides a multi function simulation of the left ventricle, and can be used to evaluate SPECT imaging of cold defects within myocardium.
|
|
PET Phantom - NEMA/IEC 2000
The NEMA/IEC 2000 PET Phantom consists of a body phantom, a fillable lung insert and an insert with six various size spheres that are fillable from the outside of the phantom.
The cylindrical insert is filled with Styrofoam beads.
The user fills the chamber with liquid. It is designed in accordance with the recommendations by the International Electrotechnical Commission
(IEC) and modified by the National Electrical Manufacturers Association (NEMA.)
It is recommended for use in the evaluation of reconstructed image quality in whole body PET imaging.
|
|
PET Sensitivity Phantom - NEMA 2001
The phantom consists of six concentric tubes that slide into each other. The innermost tube is fillable. The outer tubes are placed over the filled inner tube and imaged, adding a tube for each image. The resulting images allow the user to determine the system.s sensitivity.
|
|
PET Scatter Phantom - NEMA 2001
The NEMA 2000 PET Scatter Phantom is designed in compliance with the recommendations of the National Electrical Manufacturers Association (NEMA- 2000 Standard) to standardize the measurement of count rate performance of a scintillation camera in the presence of scatter.
|
|
